Chain Link Fence Parts
Chain Link Fence Parts is a huge part of Wholesale Fencing Company and we are so glad to offer them. We have chain Link made right here in the USA. We are well stocked and offer everything you might need for your home or business. We have 4,5,6 foot residential chain link fence and we offer a wide range of commercial and security fencing as well.
DIY Chain Link Fence Parts
Also, for all the Do it yourself crowd we have a YOUTUBE Channel. In the videos you will find information to help you, so that you can learn how to plan out your project. Included in the videos are helpful tips from the pros we have built fence for more than 40 years. Please visit our channel and follow us for more information soon to come. Also check us out on Facebook and Instagram for upcoming sales.
Chain Link Fence Parts Gates
– Inexpensive vinyl fence systems will often cut a panel down in width, screw on a diagonal vinyl piece of some sort and call it a ‘gate’. Gate hinges are inferior to others as they only ‘face-mount’ to the post and gate.
Better systems will have a ‘true’ gate with better design to help prevent gate sag. Gates constitute the largest quantity of call backs to installers as they can be tricky, are usually the only part of the fence designed to move, and are often underestimated when designed and installed. A gate is a bad place to ‘skimp’ on your fence project as it could cause hours to years of aggravating maintenance when adjusting, realigning, and replacing parts and hardware.
A better quality gate should have gate uprights fastened to horizontal rails in a secure fashion. Better brands may have ‘gate sockets’ glued and riveted into uprights to accept horizontal fence rails. Steel, or aluminum frame are often used to help prevent sag on better quality vinyl fences.
Chain Link Gate Hardware
You will also find a variety of quality gate hardware sets available to compliment vinyl gates. Better hardware will be designed to mount to two sides of the gate hinge post and often the gate upright itself which allows for multiple points to install screws or ‘thru-bolts’.
Avoid hinges which are single dimensional and will only allow you to drive screws into the face of the gate. The gate post will easily be pulled from both during wind.
The same principle will apply to latches and having attachment point on both sides of a gate post and gate upright. When choosing a low-to-no maintenance fence, use stainless steel hardware. Which has been powder coated, or a quality polymer piece of hardware.
Installing regular painted steel hardware on a vinyl fence will cause rust stains to bleed down the face of your new fence in a few years.
Worse yet, you won’t be able to replace it with better hardware without then seeing old holes in your fence and gate where the old cheap hardware used to be.
Your Dealer and Fence Manufacturers’ Credentials –
Buy from a well-established fence dealer and long-standing manufacturer and you will rarely err. Professional fence companies and manufacturer’s will service your needs. This isn’t to say they also won’t make mistakes, but they will work feverishly to fix them.
For Questions or to order your fence please contact us at 877-573-5561 or email us at sales@wholesalefencing.com