Chain Link Fence Black

Chain Link Fence Black is a common fence that is asked for lately. We carry vinyl coated black chain link fencing as well as many other colors. We have a full line up and it is made right here in the USA. We can get the color you want for your home or business by ordering it special.

If we do this we will want a drawing of the area you wish to fence with the proper measurements so we can get the correct amount. This way we will not need to order more or give you too much. This will be a not returnable order due to the fact it is specially ordered for your project.This is not a problem for us because we do this a lot. 

DIY Chain Link Fence Parts

Also, for all the Do it yourself crowd we have a YOUTUBE Channel. In the videos you will find information to help you, so that you can learn how to plan out your project. Included in the videos are helpful tips from the pros we have built fence for more than 40 years. Please visit our channel and follow us for more information soon to come. Also check us out on Facebook and Instagram for upcoming sales.

Chain Link Fence Black Parts Gates 

– Inexpensive vinyl fence systems will often cut a panel down in width, screw on a diagonal vinyl piece of some sort and call it a ‘gate’. Gate hinges are inferior to others as they only ‘face-mount’ to the post and gate. 

Better systems will have a ‘true’ gate with better design to help prevent gate sag. Gates constitute the largest quantity of call backs to installers as they can be tricky. They are usually the only part of the fence designed to move, and are often underestimated when designed and installed. A gate is a bad place to ‘skimp’ on your fence project as it could cause hours to years of aggravating maintenance. When adjusting, realigning, and replacing parts and hardware.

A better quality gate should have gate uprights fastened to horizontal rails in a secure fashion. Better brands may have ‘gate sockets’ glued and riveted into uprights to accept horizontal fence rails. Steel, or aluminum frame are often used to help prevent sag on better quality vinyl fences.

Chain Link Fence Black Gate Hardware

You will also find a variety of quality gate hardware sets available to compliment vinyl gates. Better hardware will be designed to mount to two sides of the gate hinge post and often the gate upright itself which allows for multiple points to install screws or ‘thru-bolts’. 

Avoid hinges which are single dimensional and will only allow you to drive screws into the face of the gate. The gate post will easily be pulled from both during wind.

The same principle will apply to latches and having attachment point on both sides of a gate post and gate upright. When choosing a low-to-no maintenance fence, use stainless steel hardware. Which has been powder coated, or a quality polymer piece of hardware. 

Installing regular painted steel hardware on a vinyl fence will cause rust stains to bleed down the face of your new fence in a few years. 

Worse yet, you won’t be able to replace it with better hardware without then seeing old holes in your fence and gate where the old cheap hardware used to be.

 Your Dealer and Fence Manufacturers’ Credentials – 

Buy from a well-established fence dealer and long-standing manufacturer and you will rarely err. Professional fence companies and manufacturer’s will service your needs. This isn’t to say they also won’t make mistakes, but they will work feverishly to fix them.

For Questions or to order your fence please contact us at 877-573-5561 or email us at sales@wholesalefencing.com