Vinyl Picket Fencing

Vinyl Picket Fencing takes us back to earlier and simpler times. We all have seen TV specials or sitcoms where all the homes have picket fencing. Back then they were made of wood and needed lots of care. Now we have vinyl picket fencing which looks as good and has very little care needed.

When you are planning to put in that dream fence we can help you do just that. We offer different style for different needs and locations and also we carry only the vinyl Picket Fencing made in the USA.

 

Vinyl Picket Fencing DIY

 

Also, for all the Do it yourself crowd we have a YOUTUBE Channel. In the videos you will find information to help you, so that you can learn how to plan out your project. Included in the videos are helpful tips from the pros we have built fence for more than 40 years. Please visit our channel and follow us for more information soon to come. Also check us out on Facebook and Instagram for upcoming sales.

 

Melrose Vinyl Picket Fencing

 

Melrose Fencing is the traditional picket style that we all picture in our minds. It is the straight line 2 rail picket fence and it is perfect for your front yard or business store front. It is made here in the USA and it will hold up in many different climates. We offer two types of caps for your pickets. The most common are pointed and Dog ear caps. We have a good selection of caps for your post as well. Our gate shop will be able to help you with any gate needs you might have.

Scalloped Melrose Vinyl Picket Fencing

 

Scalloped Melrose is a very elegant style of fencing and is built very similar to the traditional Melrose fencing. The biggest difference is that instead of a straight line top the scalloped is in more of a wave form. Now you can have this where it starts high at the post and goes down or start small at the post and goes up. If you go to our website you will see the differences that are explained here.

Savannah/Regency Vinyl Picket Fencing

 

The Savannah/Regency vinyl picket fencing is the perfect choice for your swimming pool area. It is different from the other picket fencing as the pickets do not come through the top rail. It is a smooth top fencing and it will meet all codes and regulations in your area. Your gates and latches will also meet the codes for fencing around pools and hot tubs. Your fencing needs are found right here with us and remember all your fence is made right here in the USA.

Wholesale  Fencing Company

 

As Wholesale Vinyl Fence Company home town wholesale supplier, we hope to help all our friends and neighbors. You are in luck, because we offer a full line up uf vinyl fencing, chain link fencing, Horse fencing and iron fencing. As a wholesaler we have a full shop to help make your gates and fabricate any parts you might need for your fence

Wholesale Fencing Vinyl Store

 

Wholesale Fence Store offers you a full line of vinyl fence products and you can get many different styles for your home or business. You have many different types of vinyl on the market and we are proud to carry Commercial grade quality made here in the USA. Our full shop can construct your gates to last. We use a full metal internal frame for our vinyl gates. We build those and ship them out directly to your home or office. Our goal is to sale to the public and contractors alike.

Wholesale Fencing Gate Shop

 

Wholesale Fencing has an excellent gate shop where we make all our gates and we have over 40 years in the business. This means that you can get any type of gate you need for your fence. We build solid steel frames for our vinyl and wood gates. The vinyl gate has a full metal inclosed frame wrapped in the vinyl material.

 That way you get the great look of a vinyl gate and have the strength and the adjustability you will need. Gates need to be adjusted about every 6 months to a year. That is caused by the temperature changes and and ground movement. Our latches have adjustments built in to them for ease of adjustment when needed.

Choosing Vinyl Picket Fencing:

There are many brands and types of fence in the market these days and navigating these can be sometimes be akin to navigating a mine field – even amongst seasoned professionals! Here are a few brief tips to consider when choosing a vinyl fence for your home or business:

Vinyl Picket Fencing Ingredients 

Wholesale Fencing uses Vinyl made From Virgin PVC and not all vinyl fences are created equal. Professional grade vinyl fences are made of virgin vinyl/ PVC. The consumer grade fences are often made of recycled plastics, often the scraps from the ‘good stuff’.
In fact, many brands will have their professional grade materials available from professional fence and deck dealers only, and then create a separate brand for many of the ‘big box’ stores for consumers. 
Although, it is hip to use recycled products and shop for environmentally ‘green’ fencing products, some are simply less than desirable as a building product that needs to withstand the weather. 
Such as the elements, high winds, and sun (UV) damage. Vinyl fencing made of recycled plastics will often sag prematurely, become brittle (especially in cold climates), and fade and warp prematurely.

Professional Grade Vinyl

Professional, contractor grade fencing will not only use virgin vinyl, but also mix UV inhibitors in to help prevent against sun (UV) damage. If you wish to simply buy a couple sections of 3-4′ high spaced picket fence for a corner accent.
A consumer grade fence may be a perfect fit. Installing it would only be a couple hours at best and it would be easy to replace when it wears out…and this is only a question of when it wears out, not if it wears out. 
If you wish to buy a taller fence, install 10, 20, or 30 sections of fence with gates, and have it last more than a season or two, choose a professional grade fence worth investing in and installing.
Installing fence is a significant investment, sometimes thousands of dollar even as a do-it-yourself project. Spend a couple hours digging holes and mixing cement and then think about setting in concrete inferior fence posts and sections which will not last. I think you will soon agree, professional grade materials are the only type to consider using.

Pay Attention to Vinyl Fence Component Sizes and Wall Thicknesses 

To make a vinyl fence, or nearly any fence more budget-friendly, manufacturers will make components thinner  and smaller in size. 
Many inexpensive styles of vinyl fence will utilize fence posts measuring 3-1/2″ x 3-1/2″. Further, because the wall thickness is insufficient, a 4 x 4 wood post must be inserted inside the vinyl for strength. 
If you must use a 4 x 4 wood fence post on the inside of the vinyl fence post, that will tell you something about the quality of the vinyl post – it’s too thin and weak to hold the fence panel by itself. The 3-1/2″ square vinyl post might be inexpensive, but add to this the expense of a 4 x 4 wood post.

Wholesale Vinyl Post

Pay attention also to the length of the vinyl posts. Consumer grade vinyl fences often come with shorter posts. Posts should be of sufficient length to extend into concrete footers for support. 
While looking  at the wall thickness, of  horizontal rail sizes, and picket sizes. Then  you will find each of these components to be significantly less in size and thickness when compared to professional grade products. 
Professional grade fences will utilize true 4″ square posts on shorter fence and fences which allow air flow; they will use true 5″ square posts on taller fences and privacy fences. These posts do not need wooden 4 x 4 posts on the inside of them to support the fence panels. 
It is common though on all grades of vinyl fence, to use a a post insert (aluminum or steel), or the method of filling a post with cement for a gate (hinge and latch post) and terminal posts for extra support.

Pay Attention to Interior Reinforcement and Fence Section Widths 

Check pickets, rails, and posts for manufacturer’s recommendations on interior reinforcement. A quality fence will often have interior ‘ribbing’ on pickets, or other forms of reinforcement vs. a hollow rail. Quality taller vinyl fences and privacy fences will. 
Also have either a galvanized steel reinforcement channel in the bottom rail to help prevent sag; these rails are a full 8 feet in length! Be careful comparing material costs and installation time with these comparisons. A cheaper vinyl fence product may not be that much cheaper in the end.

Vinyl Picket Fencing Design 

In order to make a vinyl fence less expensive and easier to inventory, it is common for consumer brands to offer one single ‘blank’ (no holes) post. Then use a bracket of some sort to attach all horizontal rails to fence posts. 
Often these rail brackets are even a painted steel which will rust on a white vinyl fence. These brackets can be brittle and usually don’t have much to attach to seeing how it’s a vinyl fence. Having simply one post, is much easier to inventory though.
In general, better fences will have posts routed to accept the horizontal rails. Vinyl fence end posts will have holes routed on one side only to accept fence horizontal rails and terminate a fence line. 
Corner posts will have routed holes on adjacent sides to create a 90 degree or there about turn. And line posts will have holes on opposite sides to be used as an intermediate post. There are various ways in which fence manufacturers have found to ‘lock’ the rails inside the posts.

Quality of Vinyl Material

The Point is, the section is not going to come off the posts without practically tearing down the post too. Further, a fence system with routed posts is often more aesthetically pleasing when compared with a fence with brackets. In general, a routed post system will surpass a bracketed system in strength, appearance, and ease of installation. This is a generality, and there are some types of railing and fence sections with brackets which are designed well. 
Also, don’t forget to add up the costs of these fence brackets in estimating and comparing brands. The same principle will apply to how vinyl fence manufacturers design pickets to attach to rails. Inferior brands will simply glue, or screw pickets to the face of horizontal fence rails; these will not last. Better brands will often have routed rails which accept pickets through the center of them, or into extruded grooves. 
One better way of attaching pickets to the face of a horizontal rails is from the backside with larger lag screws and caps which hide the fasteners from the weather and your sight. Keep in mind, a fence is only as weak as its weakest point. Privacy fences should have tongue and groove pickets so that the fence remains private when, not if the ground shifts.

Coming Soon To Wholesale Gates 

– Inexpensive vinyl fence systems will often cut a panel down in width, screw on a diagonal vinyl piece of some sort and call it a ‘gate’. Gate hinges are inferior to others as they only ‘face-mount’ to the post and gate. 
Better systems will have a ‘true’ gate with better design to help prevent gate sag. Gates constitute the largest quantity of call backs to installers as they can be tricky, are usually the only part of the fence designed to move, and are often underestimated when designed and installed. A gate is a bad place to ‘skimp’ on your fence project as it could cause hours to years of aggravating maintenance when adjusting, realigning, and replacing parts and hardware.
A better quality gate should have gate uprights fastened to horizontal rails in a secure fashion. Better brands may have ‘gate sockets’ glued and riveted into uprights to accept horizontal fence rails. Steel, or aluminum frame are often used to help prevent sag on better quality vinyl fences.

Wholesale Gate Hardware

You will also find a variety of quality gate hardware sets available to compliment vinyl gates. Better hardware will be designed to mount to two sides of the gate hinge post and often the gate upright itself which allows for multiple points to install screws or ‘thru-bolts’. 
Avoid hinges which are single dimensional and will only allow you to drive screws into the face of the gate. The gate post will easily be pulled from both during wind.
The same principle will apply to latches and having attachment point on both sides of a gate post and gate upright. When choosing a low-to-no maintenance fence, use stainless steel hardware. Which has been powder coated, or a quality polymer piece of hardware. 
Installing regular painted steel hardware on a vinyl fence will cause rust stains to bleed down the face of your new fence in a few years. 
Worse yet, you won’t be able to replace it with better hardware without then seeing old holes in your fence and gate where the old cheap hardware used to be.

Pay Attention to Your Dealer and Fence Manufacturers’ Credentials – 

 

Buy from a well-established fence dealer and long-standing manufacturer and you will rarely err. Professional fence companies and manufacturer’s will service your needs. This isn’t to say they also won’t make mistakes, but they will work feverishly to fix them.
For Questions or to order your fence please contact us at 877-573-5561 or email us at sales@wholesalefencing.com 
Melrose
[enh_ajax_add_to_cart_button product=209 variation=212]
Scalloped Melrose
[enh_ajax_add_to_cart_button product=239 variation=267]
Savannah
[enh_ajax_add_to_cart_button product=268 variation=269]

Leave a Reply

Your email address will not be published. Required fields are marked *