Two Tone Estate Gate

Our 10′ and 12′ vinyl double gates should always be supported with wheels. Our gates have steel frames so they also have a little weight, if you do not put them on blocks when closed or wheels they will pull the post and sag over time. It does not matter if you use a gate post insert and concrete, they will sag if you do not support them. You can also add a center brace to your gates for $25 per gate, this is recommended for 10-12′ gates specifically. Make sure you do this as there is no return or warranty on gates.

Vinyl Fence Gate Kit

2 tone vinyl fence gate

Our gates come in kits. When you receive your gate you will have 2 upright, 2 rails, a hinge set, a latch and screws to assemble the gate. The pickets will come with your fence, this keeps the weight down which keeps cost of shipping down. Our gates are heavy duty. We do everything possible to deliver an exceptional product for an affordable price.


Pre-Assembled Gates From the Manufacture

You MUST measure your gate before setting your post. If the gate is coming from the manufacture we do not know if the gate you ordered will be the exact size as your invoice or if it is made to fit the opening. For instance, a 4′ gate on your invoice may not be 48″ it might be 46″ and is made to fit a 48″ opening.

Single gates: Add 2″ to the width of the gate. For instance a 4′ gate would have an opening of 4′ 2″

Double Gates: Add 3″ to the width of both gates. For instance 2 – 4′ gates would have an opening of 8′ 3″

Vinyl Gate Kit

All of our kit gates come with internal steel frames!

Gates include heavy duty powdercoated steel latch, hinges, galvanized drop rod and a steel/aluminum gate post insert!

Standard Instructions
Its always best to assemble your gate and measure before you set your post. You want to add 1″ per hinge and latch gap to the width of the gate.

Your gates are the size you ordered. Your pickets will come with your fence. The pickets in the box are just packing material.

Custom Width Instructions
Please watch this video on your gate assembly. After you set your post, get your measurements and cut your rails and steel down. Make sure you cut your steel 3/8” shorter than the rails, this accounts for the welds on the pegs. (this is not a step in the video since your gates are outside our standard kits) General rule of thumb is to have an inch gap. If you want an inch gap here is the formula to cut the rails and steel.

Double Gates: The opening ÷ 2 – 4 3/4 = rail – 3/8” = steel. 
For instance: 120” ÷ 2 = 60” 60” – 4 3/4 = 55 1/4 = rail…… 55 1/4-3/8 = 54 7/8 = steel.

Single Gates: The opening minus 5 1/4 = Rail – 3/8” = steel
For Instance: 48 – 5 1/4 = 42 3/4 = rail – 3/8 = steel which is 42 3/8

How to Install a Vinyl Fence Gate

Wholesale Vinyl Fence Company

As Wholesale Vinyl Fence Company home town wholesale supplier, we hope to help all our friends and neighbors. You are in luck, because we offer a full line up uf vinyl fencing, chain link fencing, Horse fencing and iron fencing. As a wholesaler we have a full shop to help make your gates and fabricate any parts you might need for your fence

 Wholesale Vinyl Store

Wholesale Fence Store offers you a full line of vinyl fence products and you can get many different styles for your home or business. You have many different types of vinyl on the market and we are proud to carry Commercial grade quality made here in the USA. Our full shop can construct your gates to last. We use a full metal internal frame for our vinyl gates. We build those and ship them out directly to your home or office. Our goal is to sale to the public and contractors alike.

 Chain Link Fence Store

As a wholesaler we can get many different styles and fence material. Because we are a wholesaler and as such we can buy in bulk and we get better prices. By doing this we are able to get a higher quality material for the price of the cheaper quality material. Our chainlink fence material is a 11 gauge wire or nine gauge wire. The big box stores carry an 11.5 gauge wire and will not hold up as well as the heavier gauges do. The post and top rail are .065 wall pipe and we also offer schedule 40 for the heavy industrial fence jobs. Therefore whatever your project please call us or visit our online store.

Estate privacy Vinyl Gate Shop

WVFFS  has an excellent gate shop where we make all our gates and we have over 40 years in the business. This means that you can get any type of gate you need for your fence. We build solid steel frames for our vinyl and wood gates. The vinyl gate has a full metal inclosed frame wrapped in the vinyl material. That way you get the great look of a vinyl gate and have the strength and the adjustability you will need. Gates need to be adjusted about every 6 months to a year. That is caused by the temperature changes and and ground movement. Our latches have adjustments built in to them for ease of adjustment when needed.


Leave a Reply

Your email address will not be published. Required fields are marked *