Estate With Lattice Gate

Estate With Lattice Gate

Estate with Lattice Gates are both beautiful and functional. All of our gates are built with a steel frame wrapped in vinyl. Our gate shop has many years of welding and building these strong gate frames. Lattice gives you that elegant finish look to your home or business and these gates can be built up to a 12 foot double drive.

Let Us Help! Get A Quick Quote Now!


Browse our selection of gate sizes and color options below. Prices do not include hardware. Read the instruction guidelines before installation.

 6′Hx3′W Assembled $481.85

The  6′Hx4′W Assembled $505.94

Our 6′Hx5′W Assembled $542.08

Estate w/ Lattice Gate 6′Hx6′W Assembled $566.17

5″ Gate Post Insert x 84″ $50.00


If you order a 4′ wide single gate the gate will not be 4′ wide (in most cases). Most gates will measure 46″ wide allowing a 1″ gap on each side of the post for a opening of 4′ and this goes for all single gates. For double gates the difference will be 3″. Always measure your gate before you set your post and remember to add 2″ to the opening. Make sure you insert a steel gate post insert inside the hinging post and fill the inside of the post to ground level with concrete if possible. Attach your hinges 4″ below the top rail and 4″ above the bottom rail with the self tapping screws provided. Attach your hinges to the post with the steel inside. Level the gate and make sure the gaps on each side of the gate measure the same. Attach the striker and latch at a height desired which is usually 2′ below the top rail.


Vinyl gates do not have steel reinforcements or braces and may sag. To prevent sagging, apply two 2-1/2″ bolts in each joining corner of the gate and then apply an adjustable cable brace from the bottom corner of the gate on the latch side to the top corner of the gate on the hinge side and tighten the cable until the gate feels firm. For double gates add roller wheels on each gate closest to the center where the gate latches. Bolts, brace cables and wheels are not included, customer/contractor must provide materials. We do not warranty gates due to installation guideline requirements. Each location uses different venders to build vinyl gates so your gate will not look like the image above, the image is just an example.

Wholesale Vinyl Fence Company

As Wholesale Vinyl Fence Company home town wholesale supplier, we hope to help all our friends and neighbors. You are in luck, because we offer a full line up uf vinyl fencing, chain link fencing, Horse fencing and iron fencing. As a wholesaler we have a full shop to help make your gates and fabricate any parts you might need for your fence

 Wholesale Vinyl Store

Wholesale Fence Store offers you a full line of vinyl fence products and you can get many different styles for your home or business. You have many different types of vinyl on the market and we are proud to carry Commercial grade quality made here in the USA. Our full shop can construct your gates to last. We use a full metal internal frame for our vinyl gates. We build those and ship them out directly to your home or office. Our goal is to sale to the public and contractors alike.

 Chain Link Fence Store

As a wholesaler we can get many different styles and fence material. Because we are a wholesaler and as such we can buy in bulk and we get better prices. By doing this we are able to get a higher quality material for the price of the cheaper quality material. Our chainlink fence material is a 11 gauge wire or nine gauge wire. The big box stores carry an 11.5 gauge wire and will not hold up as well as the heavier gauges do. The post and top rail are .065 wall pipe and we also offer schedule 40 for the heavy industrial fence jobs. Therefore whatever your project please call us or visit our online store.

WVF Gate Shop

WVFFS  has an excellent gate shop where we make all our gates and we have over 40 years in the business. This means that you can get any type of gate you need for your fence. We build solid steel frames for our vinyl and wood gates. The vinyl gate has a full metal inclosed frame wrapped in the vinyl material. That way you get the great look of a vinyl gate and have the strength and the adjustability you will need. Gates need to be adjusted about every 6 months to a year. That is caused by the temperature changes and and ground movement. Our latches have adjustments built in to them for ease of adjustment when needed.


Leave a Reply

Your email address will not be published. Required fields are marked *